Grasshopper 721DT / NOT AVAILABLE

Double tap to zoom

 

Features

QuikConverter™ Implement Capability

  • Add or remove implements in minutes without tools with QuikConverter™ Implement System
  • Equip your out-front mower with a wide range of tools, including turf cleanup, renovation and snow removal implements that extend your productivity year-round

 

Exclusive T-Drive™ Transmission

  • Tandem 12cc Parker pumps-in-reservoir transmission is specifically designed for turf-care applications
  • In-line CoolFan™ cooling system and integrated, replaceable, high-efficiency fine-particle filter
  • Design directs more power to the cutting deck as power-sapping components are eliminated

 

AntiVibe Power Platform®

  • Isolates the engine and T-Drive™ from the operator platform for an unprecedented vibration-free experience

 

Minimal Maintenance

  • Fewer than 10 grease points and easy top-side access to belts and filters
  • 1,000-hour transmission fluid change intervals
  • Self-tensioning belts minimize cost and labor on routine maintenance

 

Built for Long Life

  • Robotically-welded, high-grade steel construction and I-beam reinforcement for long-lasting durability
  • Centered-bearing design provides greater load-bearing capacity to easily handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts
  • Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance

 

Vigilant Operator Presence System™

  • Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt
  • Dampened steering levers that return to neutral from forward and reverse
  • Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position

 

Wide Stance Single-Fork Tail Wheels

  • Wide stance single-fork tail wheels provide increased flotation and stability for a smoother ride.

 

Ultimate Operator Station®

  • ComfortZone™ seat eliminates jostles and jolts with coil-spring suspension and a fully padded, high-back seat, padded armrests and variable density foam cushion. Iso-mounting smooths the ride, erases fatigue and keeps the operator comfortably in control at faster mowing speeds
  • Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach
  • One- or two handed operation with QuikAjust Tilt™ dual levers with 9-inch comfort range to custom fit operator's reach. Levers automatically return to neutral from either forward or reverse position and are less strenuous than riding mowers with steering wheels.

 

Heavy-duty Deck

  • Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge
  • Specially designed cutting chambers enhance airflow for better cut quality
  • Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection
  • Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength
  • Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut.
  • Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion

 

PowerFold® Electric Deck Lift

  • Standard on all FrontMount™ DuraMax® decks 48-inch and larger, PowerFold® is the zero-turn mower industry's first electric deck lift (introduced in 2004).
  • PowerFold® rotates the deck nearly 90 degrees to provide easy access to the underside of the deck for simplified maintenance and mulching package installation, plus space-saving portability and storage.
  • The feature also adjusts cutting height between 1.0 and 5.0 inches and controls deck lift functions using a single switch.

 

High Temperature Clutch Cut Out

  • Equipped with a High Temperature Clutch Cut-Out that automatically disengages the PTO if engine temperature reaches a certain point to prevent engine damage

 

Kubota Diesel Engine

  • EPA Tier 4 Final-compliant 44 cu. in. (719 cc), 3-cylinder, liquid-cooled Kubota Clean Diesel engine with horizontal crankshaft and pressure lube for smooth, reliable operation

Specifications

Specifications Model 721DT
ENGINE  
Type/Horsepower/Cylinders Kubota, 3-cyl.
Displacement 43.9 cu. in. (719 cc)
Lubrication System Pressure Lube/Filter
Crankshaft Horizontal
Cooling System Liquid
Fuel Diesel - No. 2
Fuel Capacity 8 U.S. Gal (30.28 l)
Optional Fuel Capacity NA
Air Cleaner Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Muffler Ultra quiet, single, industrial type
DURAMAX® DECKS  
DECK DuraMax
Mulching Package # 504567(52), 504569(61)
DURAMAX®; DECK SIZE  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck *
 – 61" Deck NA
 – 72" Deck NA
CUTTING HEIGHT RANGE 1.25 to 5.0 in. (3.2 cm to 12.7 cm)
CONSTRUCTION (Robotic-welded steel) Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. �7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in s
BLADES (Tempered, alloy steel)  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
– 52" Deck (3) 18 in. (45.7 cm)
 – 61" Deck NA
 – 72" Deck NA
SPINDLE ASSEMBLIES Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
SPINDLE HOUSINGS 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
BLADE DRIVE Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
TRIMABILITY (Outside of std. tire to left trim side)  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck 1.0 in. (2.5 cm)***
 – 61" Deck NA
 – 72" Deck NA
STARTER & ELECTRICAL SYSTEM  
Battery (maintenance-free) 12 Volt
Starter Solenoid shift
Ignition Breakerless, diesel quick heat glow plug
Interlock System Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
ULTIMATE OPERATOR STATION  
Seat Ultimate Suspension Ride (USR) iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered premier suspension seat.
Suspension AntiVibe PowerPlatform™ with iso-mounted seat and footrest
Console-mounted Instruments Low engine oil pressure, alternator, temperature and parking brake warning lights, engine temperature and volt gauges, digital hour meter, work lights, ignition, glow plug and push/pull PTO switches.
Work Lights Optional - LED
Hour Meter Standard
TRANSMISSION & STEERING  
Type T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
Filtration/Hydro Fluid Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
Speed 0 - 9.0 mph (0 - 14.5 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
Turning Radius True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point.
Steering One- or two-hand operation with adjustable, Hydra-Smooth™, dual levers that automatically return to neutral from either forward or reverse position.
Brakes Dynamic braking through hydrostatic transmission.
Parking Brake Disc parking brakes, one for each drive wheel.
Attachment Drive Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake.
TIRE SIZES  
FrontMount  
Drive Wheels – Standard (4-ply rated) 22x11.00x10 bar tread, high flotation, 4-ply rated
Drive Wheels – Optional (4-ply rated) 22x10.00x10, turf tread, 4-ply rated
Single Tail Wheel NA
Wide Stance Single Fork Tail Wheel 13x6.50x6 rib tread, pneumatic (2)
Deck Tires (4-ply rated)  
– 41" Deck NA
– 42" Deck  
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck 9x3.50x4 (flat proof), 4-ply rated
 – 61" Deck NA
 – 72" Deck NA
DIMENSIONS  
Height (Seat Back) 46.0 in. (116.8 cm)
Height (Seat Cushion) 30.5 in. (77.5 cm)
Height (ROPS) 69.0 in. (175.3 cm)
Length (FrontMount w/ DuraMax® Deck - Mowing Position)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
 – 48" Deck NA
 – 52" Deck 105.5 in. (268.0 cm)
 – 61" Deck NA
 – 72" Deck NA
Length (FrontMount Power Unit + DuraMax® Deck - Folded Up)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck NA
 – 52" Deck 88.5 in. (224.8 cm)
 – 61" Deck NA
 – 72" Deck NA
Deck Width (Side Discharge)  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck 65.5 in. (166.5 cm)
 – 61" Deck NA
 – 72" Deck NA
Deck Width (Mulch*)  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck 53.5 in.* (135.9 cm)
 – 61" Deck NA
 – 72" Deck NA
FrontMount PowerUnit Only (Width/Length) 50.0 in. (127.0 cm)/67.0 in. (170.2 cm)
FrontMount Power Unit (Wheelbase) 51.5 in. (130.8 cm)
WEIGHT - (Uncrated)  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck 1335 lbs. (605.5 kg)
 – 61" Deck NA
 – 72" Deck NA
FrontMount Power Unit Only (uncrated) 965 lbs. (437.7 kg)
FrontMount Deck Only - Side Discharge (uncrated)  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck 370 lbs. (167.8 kg)
 – 61" Deck NA
 – 72" Deck NA
Mulching Package  
– 41" Deck NA
– 42" Deck NA
 – 44" Deck NA
 – 48" Deck NA
 – 52" Deck 29 lbs. (13.2 kg)
 – 61" Deck NA
 – 72" Deck NA