Land Pride RCPM3060

Double tap to zoom

 

Features

FEATURES BENEFITS
Tractor hp Range    RCP(M)2660
RCP(M)3060
Designed for 75-150 hp tractor with minimum weight of 8,000 lbs.
Designed for 95-175 hp tractor with minimum weight of 12,000 lbs.
Gearbox HP Rating 150 HP
3 Point Design Does not tie up a tractor. Three point hook up is easy to hook up and remove from tractor.
Cutter Deck Visibility Visibility of the cutter deck is captured from the operator's seat. Easy to see operation. Operator does not have to look behind.
Factory Assembled Arrives ready for the customer, saves time and money. (Excluding fluids and hydraulic valve)
Grease Ports All grease ports are easily accessible for servicing.
10' Transport Width Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.
Parallel Arm Design Three cylinders used in a parallel arm design allows any cylinder to be adjusted without changing the position of the others. Means less positioning.
Long Horizontal Reach
RCP(M)2660 = 15'-6" (186")
RCP(M)3060 = 18'-10" (226")

Good access for reaching vegetation far away from the tractor.
Better access for reaching vegetation far away from the tractor.
Above Grade Vertical Reach
RCP(M)2660 = 11'-5" (137")
RCP(M)3060 = 13'-5" (161")

Good access for reaching up embankments and cutting low over hanging limbs.
Better access for reaching up embankments and cutting low over hanging limbs.
Below Grade Reach
RCP(M)2660 = 9'-1" (109")
RCP(M)3060 = 11'-0" (132")

Good access for reaching down embankments.
Better access for reaching down embankments.
180 Degree Operating Tilt Arc Cutter head can be positioned to reach different angles.
Cat. 2 & 3; 540 or 1000 RPM Fits a wide variety of tractors.
35 Gallon Oil Reservoir Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
2" Cutting Capacity Ideal for trimming brush.
High Blade Tip Speed 15,000 FPM tip speed means cleaner cutting.
Two Parking Stands Easy and level storage, makes it easy for hooking to tractor.
In-line Filter Cleans hydraulic fluid before it re-enters the reservoir.
Shut-off Valve Permits maintenance with minimum oil loss.
Built-in Auxiliary Weight Rack on Left Side Suitcase weights can be added to left side for balance. Able to choose the weight bracket to match various types of suitcase weights.
Oil Pressure Gauge Easily monitor oil pressure for optimum performance of unit.
Hydraulic Breakaway Allows the parallel arms to pivot backwards to avoid obstacles and to protect cutter deck and parallel arms. Parallel arms are pivoted back to normal operating position with the hydraulic breakaway cylinder.
Flow Control Valve Compensates for various tractor hydraulic systems so proper hydraulic fluid pressure can be maintained. (Used only with solenoid control Option.)
Solenoid Controlled Cylinders Allows cutter to be used on tractors with only two hydraulic duplex outlets. Response time is faster than tractor controls making it an excellent choice when frequent changes to deck position. (Used only on Solenoid Control and Independent Control Options)
Gauge Wheels Option Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and deck.
Independent Control Option (Self-Contained Hydraulics) Self contained hydraulic system eliminates the tractor/RCP hydraulic incompatibility. This option uses the RCP hydraulic system to operate the cutter. Tractor needs one set of hydraulics to operate the breakaway cylinder.
Kubota 3-Point Stabilizer Kit Makes the RCP2660 Parallel Arm Rotary Cutter a match fit for Kubota tractor model numbers 
M126GX, M135GX, M6-141, and M6-141.
Slow Moving Vehicle Mounting
Socket (Standard)
Slow Moving Vehicle Sign
(Accessory)
Mounting socket receives most slow moving vehicle signs equipped with a mounting blade
for ease of attachment and removal when transporting on a truck or trailer.
Slow moving vehicle sign is offered as an accessory when the tractor’s slow moving vehicle
sign and mounting blade does not fit the cutter’s standard mounting socket.

Specifications

Model No.  RCPM3060
Power Take-Off Input Speed 1000 rpm
Deck Motor rpm @Power Take-Off Speed 1000 rpm @ 1000 power take-off
Minimum Tractor Horsepower 95 hp
Minimum Base Tractor Weight 12,000 Lbs. without added weights
Weight 2,225 lbs (No fluid and without gauge wheels)
Cutting Width 58"
Overall Width (Fully Extended) 22'-11"
Transport Width 10' (without gauge wheels)
Minimum Cutting Height (Deck Level) 2"
Maximum Horizontal Reach from Center Tractor 18'-10" (226")
Maximum Vertical Reach (Above Horizontal) 13'-5" (161")
Maximum Vertical Reach (Below Horizontal) 11'-0" (132")
Deck Rotating Arc 180 Degrees
Blade Tip Speed 15,000 fm
Blade Size 1/2" x 4"
Blade Rotation Clockwise
Blade Bolt 1 1/2" With keyway; nut
Dishpan 3/16" X 21" Round, dish shaped
Cutting Capacity 2" Max.
Deck Thickness 10 GA
Speed Increaser Fluid Capacity 1 Pint
Speed Increaser Fluid 80-90W EP Gearlube
Hydraulic Fluid Mobilfluid 424
Reservoir Capacity and Filter 35 Gallons / Conventional 10 Micron Filter
Hydraulic Fluid Flow Rate Approximately 15 gpm or 56.8 L/min.
Overload Protection Hydraulic relief valve
Breakaway Protection Hydraulic Cylinder
Driveline ASAE Category 2
Hitch 3-Point Cat. 2 & 3 with clevis style lower hitch, Quick Hitch adaptable except with M126GX, M135GX, or M6-141 Kubota tractors
Skid Shoes 1/4" Reversible
Gauge Wheel Option  
Gauge Wheels Three 13 x 5.00 - 6 Semi-solid smooth tires with greasable caged roller bearings.
Height Adjustment Two Ratchet jacks
Hydraulic Control Options  
Options Tractor Control With or Without Deck Float; Solenoid Control With or Without Deck Float; Independent Control With or Without Deck Float
Optional & Accessory Equipment  
Operator Protective shield Extruded aluminum frame and glazed with 1/4" clear lexan polycarbonate
Kubota 3-Point Stabilizer Kit Not Available
Slow Moving Vehicle Sign Slow moving decal on galvanized steel back sign and plated or galvanized mount.