New Holland CR8090

Double tap to zoom

 

Features

ENGINE

CLEAN-BREATHING ENGINES THAT SAVE YOU UP TO 10%
TAKE THAT TO THE BANK
CR Series combines benefit from the clean power and performance of FPT Industrial Cursor 9, 10 and 13 engines with ECOBlue™ SCR technology for Tier 4A-compliance.

THE ECOBLUE ADVANTAGE: BREATHABILITY
By using ECOBlue technology with Selective Catalytic Reduction (SCR) and DEF/AdBlue® after treatment, the nitrogen oxides in exhaust gas are converted to harmless water and nitrogen. This treatment is separate from the air intake which means an SCR engine “breathes” only clean fresh air, ensuring optimal combustion conditions.

REDUCED RPM SAVES YOU MONEY, TOO
The engines powering CR Series combines are not only helping to save the environment, they help to save you a nice chunk of change, too - up to 10% savings in fuel! During transport, engines can run at a low 1600 rpm. Reduced engine rpm at idle helps reduce fuel consumption, too.

COOLER IS BETTER
CR Tier 4 ECOBlue SCR engines run much cooler than previous Tier 3 engines, allowing for better fuel economy, and in some models, increased power.

FEEDING

SMOOTH FEEDING. EVEN CROP FLOW. HIGHER CAPACITY
TAKE THAT TO THE BANK.
CR Series combines feature a significantly upgraded feeding system that enhances its already highly efficient operation.

REINFORCED FEEDER
New Holland increased feeder housing strength and increased lift capacity significantly to ensure maximum reliability and performance, even with the very largest headers. New Holland has also improved service access, reduced service requirements, increased reversing force and increased lateral float angle. Four feeder chains with connecting slats are standard on the largest CR combine models - the CR8090 and CR9090 - for maximum durability, and improved crop flow and feeding to the Twin Rotors®.

INTELLICRUISE SMOOTHNESS
The IntelliCruise™ automatic crop feeding system automatically matches the forward speed to crop load. A sensor on the feeder driveline continually monitors the demand placed on the header. In areas with lighter crop, forward speed automatically increases to guarantee the CR combine works at full capacity.

TERRAIN TRACER™ LATERAL FLOAT SYSTEM
When harvesting on uneven ground, the Terrain Tracer system ensures you capture every grain of crop. The system automatically raises the head vertically and tilts the head laterally to follow the contours of your fields using the mode you choose:

• Compensation Mode - ideal for low-growing crops like peas and beans, this mode maintains a pre-established contact pressure
• Stubble Height Mode - maintains a pre-set stubble height using sensors on the underside of the header
• AutoFloat™ Mode - uses a combination of sensors to maintain a uniform stubble height, plus prevents bulldozing.

REVERSE OUT SLUGS
New Holland’s unique header/reverser system allows you to reverse-out slugs and slowly feed material back into the combine. Simply disengage the header/feeder drive by flipping a rocker switch on the right-hand console. The “+” and “–” buttons on the multifunction handle operate the feeder in reverse and forward directions.

FAST HEAD HOOK-UP
An easy one-lever, left-side head latching system provides safe, secure and fast head connection while standing comfortably beside the feeder. A hydraulic multi-coupler provides one-step quick connect and disconnect for all hydraulic functions

THE WIDEST SELECTION OF HEADS IN THE BUSINESS
New Holland offers the widest variety of heads to harvest a vast array of crops. From small grain to grass and flower seeds, from rice to corn and beans, New Holland has the perfect match for high capacity CR Twin Rotor® combines. Header options include:
• 740CF Super Flex cutterbar auger heads
• 760CG Varifeed™ rigid cutterbar auger heads
• 790CP windrow pickup heads
• 880CF Super Flex cutterbar draper heads
• 840CD rigid cutterbar draper heads

Specifications

CR8090  
Combine Class  
Combine Class 8
Grain Header  
Cutting width - 72C direct-cut rigid cutterbar auger ft. (m) 25 & 30 (7.62 & 9.15)
Cutting width - 740CF direct-cut SuperFlex cutterbar auger ft. (m) 20-35 (6.10-10.67)
Cutting width - 760CG Varifeed™ rigid cutterbar auger ft. (m) 30 & 35 (9.15 & 10.67)
Cutting width - 790CP windrow pickup ft. (m) 12 & 15 (3.66 & 4.57)
Cutting width - 880CF SuperFlex cutterbar draper ft. (m) 30-45 (9.15-13.72)
Cutting width - 840CD rigid draper head ft. (m) 25-45 (7.62-13.72)
Corn Headers  
980CR rigid corn head (rows) 6, 8, 12
980CF folding corn head (rows) 12
Automatic Header Control Systems  
Terrain Tracer™ system Standard
Autofloat™ system Standard
Straw Elevator  
Number of chains 4
ASP™ system (Advanced Stone Protection) Standard
Dynamic Stone Protection™ system Optional
Fixed feeder drive Standard
Variable feeder drive Optional
Harvest Suite™ Cab Volume  
Harvest Suite™ Cab Volume [ft.³ (m³)] 62.3 (5.8)
IntelliView™ IV monitor with adjustable position Standard
ACS (Automatic Crop Settings) Standard
Air-conditioning and coolbox Standard
Automatic climate control Standard
MP3 radio Optional
New Holland Precision Land Management Systems  
IntelliSteer™ ready automatic guidance system Standard
IntelliCruise™ system Optional
Full precision farming package including Yield measuring and moisture measuring, D-GPS yield mapping Optional
Full precision farming package including Desktop software and software support service Optional
Twin Rotor® Technology  
S³ rotors Standard
Twin Pitch rotors Optional
Rotor diameter [in. (mm)] 22 (559)
Rotor length [in. (mm)] 104 (2632)
Adjustable rotor vanes Optional
Cleaning  
Self-levelling cleaning shoe Standard
Enhanced aggressive shake shoe cleaning system Standard
Total sieve area under wind control [in.² (m²)] 10,075 (6.5)
Graintank and Unloading  
Graintank manual folding extensions [bushels (l)] 410 (14,500)
Graintank electric folding cover [bushels (l)] NA
Unloading speed [bu/sec (l/sec)] 4.0 (136)
Engine* Compliant with Tier 4 Emissions Regulations  
Engine* Compliant with Tier 4 Emissions Regulations (l) FPT Cursor 9 (8.7)*
ECOBlue™ SCR system (Selective Catalytic Reduction) Standard
Gross engine power @ 2100 rpm [(CV) HP] 449
Maximum engine power @ 2000 rpm [(CV) HP] 490
Approved biodiesel blend** B20
Engine blow off system Optional
Fuel Tank  
Diesel capacity [gal. (l)] 265 (1000)
AdBlue capacity [gal. (l)] 32 (120)
Transmission  
Differential lock Optional
Road transport speed (20 mph) Standard
Road transport speed (25 mph) Optional
Factory installed SmartTrax™ system Optional
Residue Management  
Integrated straw chopper Standard
PSD™ (Positive Straw Discharge) belt Optional
Opti-Spread™ residue management Optional
Weight  
Weight - Standard version less header and less strawchopper [lbs. (kg)] 38,517 (17,471)
Dimensions  
Dimensions with traction wheels / tracks*** 900/60 R32
Wheelbase [ft. (m)] 12' 4" (3.76)
Maximum height - transport [ft. (m)] 13' (3.96)
Maximum width [ft. (m)] 13' (3.96)
Maximum width - transport [ft. (m)] 10' 10" (3.3)