Kuhn FC 9330 D RA

Double tap to zoom

 

Features

THE OPTIDISC® ELITE CUTTERBAR

The Optidisc® Elite Cutterbar: A Clean and Consistent Cut

Lubed-For-Life Optidisc® Elite Cutterbar
The Optidisc® Elite cutterbar provides a flat, streamlined profile so that soil and crop residue do not accumulate and material flows smoothly, even in heavy, difficult crop conditions. These mowers come standard with the Fast-Fit® quick release knife system. Optidisc Elite cutterbars are designed and tested with a zero oil change interval. The highly-polished gears and synthetic gear oil ensure that this system does not require any regular internal maintenance, eliminating the need for cutterbar oil changes throughout the life of the machine.

Differential Disc Spacing
The innovative design of the Optidisc Elite cutterbar offers exclusive differential disc spacing.
Less Distance for a Clean Cut - Narrower spacing at diverging discs provides greater knife overlap, which results in a clean cut, even when the grass is short or light.
More Distance for Easy Crop Passage - Wider spacing at converging discs provides more space for the crop to pass. Cut crop is quickly carried away from the cutting area, greatly improving the cut quality.

Standard Fast-Fit® Knives
The Fast-Fit® quick-release knife system allows an operator to rapidly change out cutting knives with the use of a simple tool, yet still retain optimum cut quality and knife life. With Fast-Fit, an operator can achieve up to 50% time savings over a standard system.

Extra Rigidity Where it Counts
Disc bearing stations are attached by bolts that pass through the entire cutterbar. This is an exceptionally strong and secure attachment with no risk of mount being torn out of the cutterbar in case of shocks. The disc drive pinion is held precisely in place, all resulting in excellent reliability and reduced maintenance costs.

Gear-to-Gear Power Transmission

Gear-to-gear power transmission, a staple of all KUHN disc mowers, allows for maximum power to be transferred through all gears in the cutterbar. Unlike other gear cutterbars, equal sized gears throughout reduces torque on the gear teeth and leads to unsurpassed reliability and longevity.

Protectadrive® Disc Bearing Stations

  • Protectadrive® Safety: Every minute saved during the hay season is precious. Ultimate protection, from the externally removable Protectadrive disc bearing stations, provides maximum reliability and quick service. In the event of an impact between a disc and an obstacle, the shaft holding the disc can shear just above the bearing. This is thanks to its carefully dimensioned shear groove. As a result, the gear teeth are protected.
  • Extra Rigidity Where it Counts: Disc bearing stations are attached by bolts that pass through the entire cutterbar. This is an exceptionally strong and secure attachment with no risk of mount being torn out of the cutterbar in case of shocks. The disc drive pinion is held precisely in place, all resulting in excellent reliability and reduced maintenance costs.
  • Gear-to-Gear Power Transmission: Gear-to-gear power transmission, a staple of all KUHN disc mowers, allows for maximum power to be transferred through all gears in the cutterbar. Unlike other gear cutterbars, equal sized gears throughout reduces torque on the gear teeth and leads to unsurpassed reliability and longevity.

 

EXCEPTIONAL MANEUVERABILITY

Lift-Control Hydropneumatic Suspension
Lift-Control is much more than just a suspension system with a nitrogen accumulator replacing the traditional spring. The main advantage of the Lift-Control system is derived from the exclusive way in which kinetic forces that act on the cutterbar are utilized. KUHN engineers have succeeded in making a dynamic suspension system, as opposed to the passive system most commonly used.
With the Lift-Control system, as the force exerted on the cutterbar increases, the suspension system automatically lightens the cutterbar. The greater the force, the lighter the cutterbar.
Benefits include:

  • Constant ground pressure
  • Non-stop safety breakaway
  • Excellent terrain following
  • Less soil in the crop
  • Minimize torn up turf

 

Active Non-Stop Safety Breakaway
No farmer can afford to damage his mower during the peak of the season because of an unnoticed obstacle or maneuvering error. On the new rear units, the mowing unit pivots rearward around the bracing pin when hitting and obstacle. In this moment, oil is transferred toward the suspension cylinder. The resulting pressure increase facilitates the mowing unit raising to clear the obstruction. Return to the initial working position is carried out nonstop.

Wide Overlap
For a clean cut on slopes and bends, the overlap between the front and rear units can be adjusted hydraulically between 16.5” and 24.4” (depending on the model combination) – even while driving. This is a real benefit for tractors with wide wheel spacing or large wheels.

 

UNIFORM CROP CONDITIONING

Windrow Mergers
The merger on the mower offers the operator more diversity in windrow placement. The wide merger conveyor allows the crop to be easily and gently transferred into the windrow. The merger conveyor belt can be angled and has individual conveyor lift abilities. No tools are needed for belt tensioning adjustments and the merger can be dismounted from the mower.

DigiDry® Finger Conditioner
The DigiDry® finger conditioner provides consistent drying of grass and legume crops in various conditions with little maintenance. Wide rotor, fingerstyle conditioning increase crop-on-crop rubbing to strip off the waxy cuticle helping the steams dry at the same rate as the leaves. The built-in breakback feature normally protects against damage from rock and other foreign materials.

Direct Drive Design
The direct drive design to the conditioner provides easy access for servicing and fully eliminates belts. Reliability is greatly improved when working in longer crops such as ryegrass.

FlexProtect Side Shields
On encountering an obstacle, the KUHN FlexProtect side covers ben without breaking or damaging the mower. After the obstacle’s passage, the side shield automatically returns back to its original shape.

Specifications

SPECIFICATIONS FC 9330 D RA
Working width - In combination with a front mower 30' 6" (9.3m)
Overlap between front and rear units 1' 4" (42 cm) FC 3125 DF / 2' (62cm) FC 3525 DF
Overlap with a front mower 11' 8" (3.5m)
Transport width With FC 3125 DF 9' 8'' (2.95m), with FC 3525 DF 11' (3.35m)
Transport height 13' 1'' (4.0m)
Cutterbar Optidisc® Elite
Number of discs 2 X 8
Blade retention system Fast-Fit®
Cutting height 1.4" - 2.6" (35 to 65 mm)
Removable Protectadrive® disc bearing stations Standard
Suspension Lift-Control® hydro-pneumatic
Safety breakaway system Non-Stop hydraulic
Conditioning system DigiDry® steel fingers
Conditioning speed 755 or 1,000 rpm
Conditioner width 111'' (282 cm)
Suspension - travel 18.5'' (47 cm)
Overall windrow width (min/max) approx. 5'11' - 11'10" (1.8 - 3.6 m) in center delivery
Conveyor belt drive Self-contained hydraulic system
Forage delivered by conveyor belt Center delivery/one merger raised or both mergers raised
Merger operation and function control Merger raise/lower, belt speed, and windrow width via ISOBUS terminal
Hitch 3-point - Cat. 3 or 4N (Quick Hitch cat. 3/4N compatible)
PTO speed 1,000 rpm
Primary PTO 1-3/4'' - 20-spline
Free wheel Standard, integrated into lateral gearbox
Friction slip clutch Standard
Minimum PTO power requirement 220 hp (162 kW)
Required tractor hydraulic connections Rear machine: LS connection (1x Pressure, 1x Free return, 1x Load sensing)
Required tractor electrical connections Rear machine: 1 7-pin plug and 1 ISOBUS plug
Road lights and signaling Standard
Machine weight approx. 8,775 lb (3,980 kg)