Kuhn GLADIATOR 1205-830
Double tap to zoom
The row unit is the heart of the machine. ST-PRO row units are easily adjusted without tools in a matter of minutes, allowing them to be quickly setup to suit field conditions and ensure continued superior strip formation from field to field. KUHN Krause ST-PRO row units have no grease zerks, therefore require no daily maintenance further saving time and increasing productivity throughout the working day.
- 25” independent coulters offer continuous residue cutting
- Adjustable down pressure from 460 pounds to 660 pounds
- Adjustable coulter scrapers remove sticky soil from the coulter blade
Floating Row Cleaners
- Floating 16” notched disc blades consistently clear residue from the strip
- Automatically adjusts to the contour of the field eliminating the need for field-to-field adjustment
- Weights can be added or removed to ensure consistent residue management and flow
- Wrench-free depth adjustment
- Remove root zone compaction
- Promote water infiltration, deep root growth and early seedling development
- Drop Zone nutrient placement system
- Shank depth range of 6" to 12" in 1" increments
Strik’R® Nonstop Soil Conditioner & Shank
- Patented chain reel technology to break clods without destroying the berm
- 18” reel with 10 individual chain sections
- Chains shed wet soil and residue, achieving a uniform seedbed without plugging
Precision Nutrient Management
The Gladiator product line features one of the most complete fertilizer application offerings in the industry. These systems are easy to operate and provide precision nutrient placement options for growers with the desire to apply dry or liquid fertilizer with or without anhydrous ammonia.
Gladiator 1205 pull-type models are all available with either 6-ton or 9-ton dry fertilizer tanks or a 1000-gallon liquid tank mounted on the chassis.
Trail Hitch for Anhydrous
Gladiator 1205M and 1205 pull-type models are available with a trail hitch, typically used for towing an anhydrous cart. All hitches feature an extendable tongue allowing the operator to position the Gladiator close to the cart and then maneuver the trail hitch to make the connection. A strap and winch is also fitted to assist with lifting the tongue of the anhydrous cart. Trail hitches are also available on Montag steerable carts for maximum fertilizer flexibility.
The Montag System
Montag dry fertilizer systems are designed so that the fertilizer for each row is metered separately. Only in this fashion can consistency across the machine be ensured. An air release is used close to the row unit to disperse air and prevent fertilizer from being blown forcefully down into the strip and bouncing out. Diffusing the air also prevents back-pressure building up in the hoses which would lead to blockages and inaccurate application rates.
Any Gladiator which may be fitted with a 9-ton dry fertilizer hopper may be equipped with the Montag Gen II system. Two 4.5-ton tanks allows the operator to blend two different types of fertilizer together for placement in the strip. Although a different design compared to the single tank system, metering still takes place on a per row basis to ensure consistent application rate across the width of the machine. Rates of the two fertilizer products are controlled independently for total control. Also available as a Montag steerable cart on 1205M mounted models.
When trailing a tank behind a mounted strip-till toolbar it is imperative that the tires remain in the zones between strips. The Montag steerable cart uses a double ball linkage to ensure that not only do the tires remain between the strips in the field, but that they also line up following turns on end rows so that no part of the strip is driven on.
Variable Rate & Section Control
The Montag Gen II twin-tank system is compatible with GPS variable rate and section control*. Use your mapping system to automatically vary the rate of either fertilizer product as you work the field. Minimize over application and wastage at point rows by dividing the machine into sections and letting the GPS switch off either half of the machine automatically.
*Compatible control system required for full functionality.
Fertilizer Blockage Monitor
Fertilizer hose blockages waste expensive nutrients and jeopardize your crop. Wireless blockage monitors alert you the moment a blockage occurs. Discreet in cab monitor provides an audible alarm and tells you which row is blocked. Monitor offers wireless technology for quick and easy installation.
The Transport Advantage
Changing from field operation to transport is quick and easy. The durable, fixed frame design with flip and fold toolbar, provides balanced, safe transport.
|Transport Width (ft/m)||12'4" / 2.9|
|Transport Height (ft/m)||9'5" / 2.9|
|Number of Row Units||8|
|Row Spacing (in/cm)||30" / 76|
|Approximate Working Width (ft/m)||20' / 6.1|
|Approximate Weight (lbs/kg)||15,324 / 6 951|
|Hitch Type||Power Pin AB Hitch|
|ST-PRO™ Row Unit||See Row Unit Specification Table (Below) for Additional information|
|Depth Control||Fixed Frame with Adjustable Shanks|
|Hydraulics||Cylinders with Royal Plate Plus®|
|Tire/Wheels||Main Frame: Walking Tandem 445 Metric, 10-Bolt Hub; Wing Frame: 12-Row 280 Metric Single on Each Wing / 16-Row 280 Metric Duals on Each Wing; Replaceable Spindles|
|Transport Locks and Safety||Hydraulic Valves, Transport and Wind Fold, Slow Moving Vehicle Sign, Height Visibility LED Lighting|
|Liquid Fertilizer||1,000 Gallon Liquid Tank, Saddles and Wash Station|
|Dry Fertilizer||6-Ton or 9-Ton Dry Fertilizer System from Montag Manufacturing|
|Rear Hitch||Liquid or NH, Nurse Cart|
|ROW UNIT SPECIFICATIONS - STANDARD EQUIPMENT|
|Frame Type||Intregal 4-Bar Link Design|
|Coulter||25", 6 gauge|
|Row Cleaners||Floating 16" Notched Disc Blades|
|Shanks||5/8" x 4-7/16"|
|Adjustable to 6" to 12" Depth|
|Berm Conditioner||STRIK'R® Chain Reel|
|ROW UNIT SPECIFICATIONS - OPTIONAL EQUIPMENT|
|Points||2" Chromium Carbide with Shank Wear Bar; 2" Rock Point with Shank Wear Bar, Adapter without NH3 Style Knives|
|DROP ZONE® Nutrient Placement System Single or Dual Configuration||3/8" Liquid - Stainless Steel; 3/8" NH3 - Stainless Steel; 1-1/2 Dry Tube - Stainless Steel|
|Closing Blades||18" Wavy Coulter Blades; 16" Notched Reversed Disc Blades; Adjustable Angle (2,10,18 degrees)|
|Recommended Operating Speed (mph/km/h)||5-8 / 8-13|
|Recommended Tractor Power Range||20-23 PTO hp Per Shank at 8" Depth|