Land Pride RTA1266
Features
FEATURES | BENEFITS |
American made | American made means better parts availability. Many tillers are imported. |
Tractor hp range* 42" & 50" 58" & 60" 74" 82" |
15-40 hp 20-50 hp 25-60 hp 30-60 hp |
Reverse tilling action | Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can. |
42”, 50”, 58”, 66” & 74” Working widths | A wide range of widths are available to meet specific customer needs. |
6 1/2” Digging depth | For deep soil penetration. |
Formed plate steel upper hitch | Plate steel is stronger than flat bar type hitch. |
Clevis lower hitch | Provides additional strength and easy one person hook-up. |
Offset Capabilities | Allows tiller to work closer to objects such as fence lines, buildings and trees. |
Fits Land Pride Quick-Hitch | Allows for quick and easy one person hook-up. (Offset cannot be used with Quick Hitch.) |
Adjustable Parking stand | Allows for easy hook-up and storage. |
Adjustable skid shoes | Control depth with various settings. |
Formed and reinforced rear tailgate | Keeps dirt in and leaves a level finish. Forming gives tailgate additional strength. Adjustable tailgate allows for various finish results. |
Front defletor | Front deflector is flexible to take the beating from rocks or debris. |
Bolt in rotor | Rotor removes and replaces easier for servicing. |
15" Rotor swing diameter | For deep tilling and turns the soil over faster. |
4 ‘C’ Shaped heat-treated tines per flange | “C” Shaped tines require less hp to move through the ground. Four tines requires less horsepower than 6 tines. |
Double lip seal on rotor bearing | Double lip seal helps keep the dirt out and the grease in. |
Fully shielded slip-clutch driveline | Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins. |
#80 Drive chain enclosed in oil bath |
Heavy drive chain stretches less, and oil bath keeps wear to a minimum. |
Stamped chaincase cover | Stamped forming gives the chain cover strength. |
Optional BX driveline | This driveline will fit BX Kubota tractors without cutting it to fit. |
Specifications
Model | RTA1266 |
Recommended tractor PTO hp* | 20 to 50 hp |
Weight | 476 lbs. |
Width, end plate to end plate | 66" |
Overall width | 71 1/8" |
3-Point hitch type | Category l, Adjustable Lower Hitch Clevis with Plated Pins Fits Land Pride Quick Hitch |
Offset capabilities | Tiller can be offset up to 7", but must be centered if using Quick Hitch |
Sideshift dimensions centered Shifted right Shifted left |
33" - 33" 26" - 40" 40" - 26" |
Number of flanges on rotor | 8 |
Number of tines per flange | 4 |
Tine construction | Alloy steel heat treated “C” shaped blades |
Rotor rotation | Reverse Rotation |
Rotor swing diameter | 15" |
Rotor Shaft Speed | 211 rpm at 540 rpm PTO |
Rotor bearing mounts | Machined cast iron |
Skid shoes | Adjustable |
Storage stands | Adjustable |
Rear tailgate | Adjustable rear tailgate |
Front deflector | Rubber |
Driveline | Category 4 with Slip Clutch |
Gearbox Construction | 50 hp input at 540rpm 1.92:1 ratio, Cast iron housing with ASAE 1 3/8" - 6 spline shaft, tapered roller bearings, bevel gears, drain plug, level plug & fill plug |
Lubrication | SAE 80-90W EP oil |
Capacity | 2 pints |
Drive chain | #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs |
Drive chain lubrication | Shell Gadus S2 V2200 00 flowable grease or equivalent Land Pride Part #821-045C (32 oz. bottle) |
Sprockets | Case hardened teeth, splined bores |