Call UsHoney Bee WS Grain Belt Swather Series
WS Grain Belt Swather WS Grain Belt Swather Series
Features
- Remote Draper Speed Control
Draper speeds are hydraulically controlled in-cab, and are adjustable up to 800 rpm. Remote draper speed control gives you the power to quickly adjust draper speeds for varying crop conditions. - Polyester Drapers
42″ (106.7 cm) drapers are made of long-lasting, rubberized polyester with fibreglass-reinforced slats and are V-guided to eliminate manual draper tracking. - Draper Drive
The 3″ (7.6 cm) diameter drive rollers provide traction in heavy crop conditions. Powered from the outside by a hydraulic motor, the drapers move the crop towards the centre for more uniform feeding. - Reel Drive
The hydraulically driven reel is easily controlled using standard in-cab controls. In-cab controls allow for quick reel adjustment in changing crop conditions. - Hydraulic Header Tilt
No-wrench header tilt adjustment for header tilt control in varying crop conditions. - SCH Cutting System
The SCH Easy Cut Cutting System provides smooth, superior cutting. Spring steel guards with cutting edges on top and bottom, along with alternating, bolted, heat-treated sections, eliminate the need for hold downs. The system keeps dirt and debris from accumulating under the knives for increased performance in severe cutting conditions. - Knife Drive
The knife is driven by a 3 5/16″ (8.4 cm) stroke, epicyclic knife drive which operates from 1,100–1,400 strokes per minute. The knife drive is driven by a low maintenance hydraulic drive motor. Double knife drive systems are available optional equipment on 25′, 30′ and 36′ models. Standard equipment on 21′. - Fore/Aft Reel Adjustment
A hydraulic adjustment with in-cab control is available for fore/aft positioning for on-the-go response to changing crop conditions with a 16″ operating range. - Skid Plates
UHMW skid plates are standard on all models to protect the cutterbar when cutting crops close to the ground. - Swath Opening
Standard swath opening is 81″ +/- 3″. Double swath standard opening of 46″ +/- 6″. Standard swath opening may be decreased by 14″ or 28″ on some models. - Draper Tension and Tracking
The canvas can be adjusted for tracking and tightening, which allows for even tension on both the front and rear of the rollers. A quick release lever allows for ease of canvas and roller cleaning. - Easy Hook-up Lift Arm Extensions
Lift arm extensions attach to the windrower lift arm using a bolt. The lift arm assembly attaches to the swather using a “no-wrench” single pin attachment. New arms provide for an easy attachment and detachment of the table. - Integral Storage Transport
The self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table. - Hay Guard
The Hay guard ensures a smooth transition from knife to draper and reduces material wrapping on the rollers.
Specifications
| WS21 | WS25 | WS30 | WS36 | |
|---|---|---|---|---|
| Width | 21′ (6.4 m) | 25′ (7.6 m) | 30′ (9.1 m) | 36′ (10.9 m) |
| Weight* (no reels or options included) |
2,462 lbs (1,117 kg) |
2,869 lbs (1,301 kg) |
3,513 lbs (1,593 kg) |
4,852 lbs (2,201 kg) |
| Hydraulic System | Supplied by Windrower. | |||
| Header Floatation | Supplied by Windrower. | |||
| Cutting System | SCH Easy Cut, spring steel guards, bolted sections. | |||
| Crary Guard with SCH Knife. | ||||
| Knife Drive | SCH Epicyclic 3 5/16″ (8.4 cm) stroke, hydraulically driven, approximately 1,100 – 1,400 strokes per minute. | |||
| Double | ||||
| Draper |
42″ (106.7 cm) wide rubberized polyester, fibreglass reinforced rubber slats. |
|||
| Reel(s) |
HB Reel - 6 bat, plastic fingers - standard 5" spacing - Assembled |
|||
| Reel Drive | Standard ‐ using Windrower Hydraulic System c/w one drive motor. Optional – Double Reel Drive motors. Reel speed adjustable in cab. |
|||
| Gauge Wheels | N/A | Standard | ||
| Storage Transport | Standard | |||
| Tires / Wheels / Hubs / Spindles | Standard | |||
| Cutterbar Poly Skid | Standard | |||
| Hay Guard | Standard | |||
| Double Swath | Standard | Optional – Hydraulic Deck Shift. Note: Some restrictions apply. | ||
| Windrower Adapters | John Deere Windrower Models: 4895 – 4995 – A400 – R450 | |||
| Cross Auger Size Specific | N/A | 25′ (7.6 m) (3pc) | 30′ (9.1 m) (3pc) | 36′ (10.9 m) (3pc) |
| Fore / Aft | Standard | |||
| Hydraulic Header Tilt | Standard | |||
| Dual Wheel Hitch Carrier | Optional | |||
